Mounted L-Shaped Partition Wall with Door 7 / 8 / 6

The Mounted L-shaped Partition Wall With Door Kit allows you to easily install a temporary or permanent room with an included accordion door anywhere in your home or business. Whether you need an office study room guest bedroom or just some added privacy you can assemble your new space quickly and mount it to your existing wall with as little as a drill and a screwdriver. This kit is perfect if you want your partition wall attached to an existing wall rather than freestanding. What's Included Wall Panels Your kit includes our signature wall panels that are 3" thick and made of Moisture and Impact Resistant Fiberglass. These panels are easily assembled at home and snap together using lug connectors for a stable and secure fit. Framed Accordion Door The included accordion door kit is 36" wide and either 84" or 96" in height depending on the height of the partition you purchase. The kit comes with a specialized lintel with a track for the accordion door. Simply slot the folding door into the track and install it between two panels locking the lintel and door into place using the lug or 2-way connectors. Each door includes two thresholds a double-sided handle and three integrated magnets to hold the door in position when closed. Note the door is placed on the width of the wall in the most economical position. Screw the L-Shaped profile to the fixed wall nest the panel inside the L and screw the channel to the panel. Detailed instructions on this can be found in the "Assembly" tab above. Lug Connectors Your kit includes two-way panel lug connectors which snap into each panel and make for an ultra-secure two-way connection. Finishing Caps Finishing caps are used to close off any exposed connector holes giving the exterior of your wall a clean finished look! Your kit includes enough caps to seal off the entire perimeter of your wall. For walls above 6'6" in height finishing caps for the top are not included. Extra finishing caps can be added from our 'accessories' page. Your ceiling must be at least 2" higher than the height of your partition. This allows you to assemble the partition comfortably and place it in your space. Do also make sure to check your floor for dips and bulges. Uneven flooring can impact the installation of your product. Once you've confirmed your ceiling height and ensured your floor is level you're good to go. Note that the wall panels are 3" thick which means that when you connect two walls in an L-shape 3" will be added to the length of one side of the wall kit. You can decide which side when you connect the walls. Door Positioning By default doors are placed in the most economical position on the "width wall". Note that doors do need to have a least 1ft of wall panel on each side.